Zip Around Wallet with Binding Tutorial

As promised here is the tutorial for the zip around wallet. This method is finished with binding. We are going to use bias binding here and you can check how to make bias binding in this Post. 

What you need:

- Family Passport Wallet Pattern or Travel Wallet Pattern

- Bias binding 1.75" wide 

- #5 zipper - 24" long
- ZIpper Foot (Optional)

Let's start :

1. Assembled the passport wallet as per the pattern instructions, minus the FLAP making part. Mark the centre top and bottom of the wallet with erasable pen. Then mark approx 3/8" to 1/2" on each side of the centre mark, like shown the in the picture below. 

2. Prepare the zipper : 

On the open end, fold the zipper tape diagonally like the above picture

Then fold it down and hold it with a clip or pin

sew along the edge like the above picture.

Sew across the close end of the zipper to prevent the zip puller from slipping off

3.  Attaching the zipper.

We will attach the zipper from the interior part of the wallet. Open the zipper and start at the top, align one folded end of the zipper , right side up,  on the right side mark. 

 Using wonder clips, clip the zipper tape all around and start sewing from the top with 1/8" seam allowance and stop when you reach the right side mark at the bottom. 

Go slow around the corners. Sew one stitch at a time as you maneuver the wallet. 

Now close the zipper and draw a line on the zipper tape from where the stitch end, like in the picture below. 

Now open the zipper again and place the marked zipper tape  in line with the left side mark at the bottom. Clip all around and start sewing from the marked line all the way to the top of the wallet with 1/8" seam allowance and stop on the left side mark. 

When finished, it will look like the pictures below: 

4. Attaching the binding. 

Fold end of the bias binding  diagonally and place it on one side of the wallet, covering the zipper tape. Sew with scant 1/4" seam allowance. 

  

Be careful while maneuvering around the corners. Remember to always push the zipper teeth away. Setting the machine speed lower will help. 

when you reach the bottom, just pull the zipper tail inward and continue sewing. 

Before turning the bias binding, slightly cut /round the corners and make small clips on the zipper and binding fabric in the corners.  

Now, put on your fave movie and start hand sew the binding :D

Last step, trim the zipper end by about 2" and encase the end of the zipper tape with a matching fabric. 

et Voila!! Pat yourself on the back for completing your beautiful wallet with all around zipper! 

I hope the tutorial is clear enough. I will try to make a video tutorial when I make my next passport wallet! It was kind of difficult to take photos and video at the same time ^_^ 

here is the wallet in action on my YouTube Channel

Do tag me in Instagram if you make one based on this tutorial. 

Thank you for your patience reading this long post :)

Happy Sewing!

- Elvira -

NEW PATTERN!! Single Passport Wallet

Hello there,

Finally, after few months I completed the pattern and is now on Special Price in Etsy and Craftsy.

Single Passport Wallet

and if you're in India, you can check the pattern category on the top of this post or scroll down to shop directly.

Special thanks to Maria and Susan for helping me testing and proofreading the pattern. As English is not my first language, there's a lot to learn. At home, we speak English, Assamese, and Hindi. Also, I talk/chat with my family and friends in Bahasa Indonesia. So, at times, it's a bit confusing lol. 

But don't worry, I included a lot of photos and few diagrams to help you understand the pattern better, even if English is not your first language like me. 

Without further ado, let's admire what Maria and Susan have made:

I simply love this hexagon wallet that Maria made. She and her florals can be very contagious lol ..if you see me making more florals in the future, the credit goes to her! 

When she asked me if she could improvise a bit, I said "definitely!!" and look what a smart addition she made. She said the slot is perfect for her smartphone! Very clever Maria.  

here a closer look!. I am going to add this next! Thank you, Maria! 

And here is Susan's wallets. She made 2  wallets and look how neat they are! 

she suggested that attaching the flap a few inch away from the wallet's edge is better for hand sewing the binding. 

 This is her second wallet and I LOVE the fabric. It looks like leather. It's perfect for travel wallet, isn't it? 

and even prettier inside <3 

The second wallet, she attached the flap away from the edge. It's the same method I used in the Family Passport Wallet Pattern. 

So, based on Susan's suggestion, I added a bonus tutorial for the flap. And of course, you can always make improvisations, like maybe a wider flap with a hexagon applique like the one I did previously. 

So, grab the pattern now and start making and selling. Don't forget to tag me on Facebook or Instagram  or use hashtag #chezvies or #chezviespatterns if you want me to find you ^^.

Until then, 

Happy Sewing