CHEZVIES: Quick Keychain Tutorial

Hello,

I've been a little bit under the weather in the past week. February weather is chilly and dry in here. This is the time when you feel warm and cold at the same time!

I made a few keychains for orders a few weeks ago and took photos and videos as I go along. So this time let's learn making keychain using faux leather!

If you're in India, you can purchase high quality faux leather from furnishing shop. There a few online too but in local shop, you might be able to purchase their sample pieces at a reduced price.

Materials:

- Faux Leather 2" x 12"

- Embroidered lace 1" x 12"

- Key fob - 1" wide

- Pliers

- Fabric glue (optional)

- Size 16 needle

- Teflon foot

Let's start:

1. Cut the faux leather and lace according to the measurement mentioned above. For keychain I would recommend a high grade sofa leather, because it's more durable! I have tried using cheaper one and not happy with the result.

2. Mark and draw a line at the center of the faux leather. Then fold the edges to the center and pin using wonder clips. DO NOT use pin. You can use alligator hair pins or paper clips too.

3. Using a teflon foot, sew along the edges of the faux leather with 1/8" seam allowance from the center.

It should look like this when finished and the width should be 1" wide.

4. Now carefully place the embroidered lace in the sewn faux leather panel. The lace should be placed on the side where the raw edges are sewn. Secure with wonder clips and top stitch carefully along the sides.

The front side

The back side should look like this.

5. Put the short end together and sew with seam allowance of 1/8". Back stitch at the beginning and end. Then apply fabric glue (optional). I like to use the glue to add additional strength and it also work great to prevent the lace edge from reveling.

6. Install the key fob carefully and use key fob pliers to finish it. If you don't have key fob pliers, you can use any wide mouth pliers and cover the key fob with thickish fabric (flannel or scrap batting worked best!). I have key fob pliers but the rubber came off :D.